Led Driver Dimming Led Driver Constant Current

Short Description:

It is equipped with a die-cast aluminum housing with a powder-coated finish, and is designed for maximum thermal management. The WALLPACK-40W also features a built-in surge protection device, and is designed to last up to 50,000 hours. This wallpack is UL and DLC listed.

Product Detail

Product Tags

LED Wallpack

Catalog # Output Watts Color      Temperature Output     Lumens (LM) Lumens Per Watt (LM/W) Dimming Control Capabilities Photocell Color HID Wattage Equivalent
Wallpack Floodlight
PPACK40D3KW 40 3000 3050 76.3 AC and 0-10V No White 200-250W 200-250W
PPACK40D3KB 40 3000 3050 76.3 AC and 0-10V No Bronze 200-250W 200-250W
PPACK40D3K1W 40 3000 3050 76.3 0-10V Yes White 200-250W 200-250W
PPACK40D3K1B 40 3000 3050 76.3 0-10V Yes Bronze 200-250W 200-250W
PPACK40D5KW 40 5000 3250 81.3 AC and 0-10V No White 200-250W 200-250W
PPACK40D5KB 40 5000 3250 81.3 AC and 0-10V No Bronze 200-250W 200-250W
PPACK40D5K1W 40 5000 3250 81.3 0-10V Yes White 200-250W 200-250W
PPACK40D5K1B 40 5000 3250 81.3 0-10V Yes Bronze 200-250W 200-250W


Voltage (V) 120-277V at 50/60 Hz
Color Accuracy (CRI) 80
Power Factor > 0.9
Lumen Maintenance (L70) 50,000 Hrs
Operating Temperature -10 C to +50 C
Certification cUL listing suitable for Damp locations and insulation contact, NOM-ANCE
Storage -40 C to +60 C
ROHS Complaint Yes
Dark-sky Compliance Yes
Weight 1.88 kg
Warranty Limited 5 years
Package Size L (8.9 Inch) X W (8.4 Inch) X H (4.4 Inch)L (215 mm) X W (210 mm) X H (106 mm)

Feature and Benefits

1. Long life

2. Dimmable

3. Energy-savings up to 85%

4. Designlights  consortium @ (DLC) qualified product

5. Superior heat-sinking

6. Outdoor wet location rated ( IP 66)

7. Easy installation

8. Can be used as down light or up light

9. Rugged die-cast construction

10. Secure lock hinge

11. J-box or conduit wiring

12. Low profile design

13. Tested by independent laboratory in accordance with IESNA LM-79 and LM-80

14. Recieved DOE “Lighting Facts” label

Four-Step Easy Installation

Note: Installation must be done by licienced electrician as per local and national electric code.

Led Driver-01 (4)

Step 1 Mount Back Body on the wall or junction box.

Led Driver-01 (5)

Step2 Position Cover into lock hinges for hands free operation.

Led Driver-01 (6)

Step3 Make electrical connections.

Led Driver-01 (7)

Step4 Close Cover and tighten screw.


Led Driver-01 (9)

Design Features

LED engine compartment separated from the Power supply.

Cooling air-flow vents and ribs further facilitate heat exchange resulting in long life.

Led Driver-01 (11)

High performance LED engine delivers superior illumination.

Available with or without Photocell control.

Led Driver-01 (12)

Porta Wallpack can be easily installed directly on the

Wall or to an existing Junction Box.

Convenient conduit openings provided for surface

mount installation.


Led Driver-01 (8)

  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories